Camouflage Monopole

Flanged Monopole Tree

An Aesthetically pleasing structure, site assembled, round flanged tubular pole. It suits applications for heights up to 60m.

  • ApplicationsFor GSM Cellular radio.
  • For microwave solid and grid antenna applications up to 3.00 meters (10’) diameter, depending on height and environmental loadings conditions.
  • For supporting UHF, VHF, YAGI and reflector type antennas.
  • Various other antenna types, sizes and loading conditions can be accommodated utilizing suitable sections of the tower. Check with LeBLANC Group Engineering Department for application.

Optional Items

The monopole tree is supplied complete with shafts, platforms, ladders, rest platforms, camouflage Leaves and branches and anchor bolts as required. The
following items are supplied as specified:
Monopole Tree grounding.

  • Monopole Tree lighting. This may be either conventional red obstruction lights or strobe lights.
  • Monopole Touch Up painting ( Brown).
  • An interchange platform can be supplied at the top to facilitate access to a top mounted antenna.
  • A cable ladder to support transmission lines.
  • Antenna mounts to suit specified antennas.
  • Antennas and transmission lines are as specified by the customer.
  • Ladder safety climbing device and accessories.
  • Antenna ice guards.
  • Transmission line gantry.


The flanged monopoles are Aesthetically pleasing structures, with small foot print, made of tubular modules assembled together by a bolted flanged connection and also come with Laminated Timber

  • Camouflage with Leaves and branches.
  • The modules are made of circular tubular poles.
  • A ladder can be mounted either inside or outside the pole for climbing.
  • Antenna mounts can be fitted to either the shaft or the platform of the pole.
  • All structural members conform to ISO EN 10025 and JIS 3101 or equivalent Standards.
  • All welding conforms to the requirements of the AWS D1.1/D1.1 M:2008 and AS/NZS 1554.1:2004 Standards.
  • Poles are designed in accordance with TIA/EIA-222- G-2005, BS8100, SABS/SANS 10160, AS 1170-2, AS 3995, CSA S37-2001 Standards or other applicable standards for the wind and ice loads specified for the particular site.
  • All material is hot-dipped galvanized after fabrication to ISO 1461, AS/NZS 4680 or ASTM A123 Standards.
  • All structural bolts conform to ASTM Standard A325 and galvanized to ASTM Standard A153.

Manufacturing quality conforms to ISO 9001: 2001 Standard.

[print_responsive_slider_plus_lightbox id="1"]